ID#: C00639MNYWS00 RSIC#: CCC-639 CODE NAME: RACC-PULSE COMPUTER: UNIX workstations PACKAGED: 04/30/96 MOST RECENT UPDATE: ****************************************************************************** 1 4mm or 8mm tape or CD-ROM as a compressed UNIX tar file ****************************************************************************** FILE DESCRIPTION MODE SIZE ****************************************************************************** 1. README.RSI RSIC information file ASCII 1354 2. c00639mnyws00.tar.Z Compressed UNIX tar file BINARY 2,148,989 (Directory of /auxilliary_code) 3. convertflux.f FORTRAN src for auxilliary code ASCII 5,306 (Directory of /data_libraries) 4. raccdlib Decay constant data ASCII 659,303 5. raccxlib Transmutation cross section data ASCII 3,885,724 (Directory of /sample_input) 6. fluxin Scalar fluxin for sample problem ASCII 213,180 7. iracc Sample input problem ASCII 5,007 (Directory of /sample_output) 8. oracc.cray Sample output from Cray-2 ASCII 2,638,725 9. oracc.workstation Sample output from DEC5000 ASCII 2,628,778 (Directory of /source_for_cray) 10. densolver1.f FORTRAN source ASCII 9,266 11. densolver2.f " " ASCII 15,843 12. ematrix.f " " ASCII 8,709 13. makefile Makefile for Cray ASCII 1,159 14. param_racc FORTRAN source ASCII 2,617 15. powerm.f " " ASCII 12,181 16. racc.new.f " " ASCII 280,228 17. schur.f " " ASCII 393,826 (Directory of /source_for_workstation) 18. densolver1.f FORTRAN source ASCII 9,266 19. densolver2.f " " ASCII 15,513 20. ematrix.f " " ASCII 8,709 21. makefile Makefile for 'UNIX workstation' ASCII 1,159 22. param_racc FORTRAN source ASCII 2,617 23. powerm.f " " ASCII 12,181 24. racc.new.f " " ASCII 280,228 25. schur.f " " ASCII 393,826 ***************************************************************************** RACC-PULSE has been run on IBM RS/6000 AIX, HP9000/700 HPUX, DEC 5000 Ultrix, Cray-2, and Cray multiprocessor computers. A Fortran 77 compiler is required. RACC-PULSE was tested at RSIC using the included sample input files on an IBM RISC 6000 Model 590 running AIX 3.2.5 using XL FORTRAN v3.2.2.3. RACC-PULSE was also tested at RSIC on a DEC 5000 running Ultrix 4.5 using DEC FORTRAN for RISC/Ultrix v3.2. *****************************************************************************